Tópico: Barry Allen for Dreambox 7025, 800,8000

Barry Allen for Dreambox 7025, 7020, 600 and 800

================================================== ==
Version 4.5.8 by gutemine from 27.07.2008
================================================== ==
Release infos
================================================== ==
0.1.0 first official Version
0.1.1 add LCD support, copy, rename and erase
0.2.0 add backup and more tools options
0.2.1 bugfixes
0.2.2 quod erat demonstrandum
0.3.0 WebIF and Wizards
0.3.1 nl, 12 images, bugfixes
0.3.2 tar.bz2 images, instant extract
0.4.0 OE 1.5 support, Flashing and user scripts WebIF
0.4.1 keep squashfs and Barry Allen gets fat
0.4.2 time for a new version and new language fr
0.4.3 feeding the GNU
0.4.4 time for a new version
4.4.6 preliminary dm800 support
4.5.0 DM 800 support
================================================== ==
Thanks to noggie for his nfi file tools !
Thanks to DarkVolli for the enigma1 plugin !
================================================== ==

1) Prerequisites

During the installation there has to be CF
card in the Dreambox (attention: insert or remove
into Dreambox 7025 cardreader only when Dreambox
is turned off), or an USB stick which is successfully
detected (in case of problems try an USB Hub).

If Barry Allen on USB is used then put
the CVS Image from OoZooN in Flash, because this image
has the USB drivers permanently built into the kernel.

If neither CF card not USB Stick are attached then
installation takes place on the Harddisk. Because
the images then also run from there it will run
permanently and it could be necessary that you disable
Harddisk Standby in the images to allow running Barry
Allen stable from Harddisk.


2) Installation

First boot from Flash and then copy the file
enigma2-plugin-extensions-barryallen*.ipk
to /tmp with ftp (TCP/IP must be working already).

If you have an image in Flash that offers a Blue
Pannel Manual Addon Install, then you can use this
functionality to install the ipk file.

If not, then install Barry Allen by entering the
following commands in a Telnet session:

cd /
ipkg install /tmp/enigma2-plugin-extensions-barryallen*.ipk

Then restart enigma2 and the Barry Allen Plugin
shoudl show up under Games / Plugins.

In the Images installed by Barry Allen you don't have
to install the Barry Allen Plugin anymore.
The Barry Allen Plugin integrates himself into then
automatically during the image extract.

And you can remove Barry Allen if you are booted
from Flash:

ipkg remove enigma2-plugin-extensions-barryallen

3) Usage

There is now the enigma2 Plugin of Barry Allen included
under Games / Plugins of the enigma2 menu,
which offers the full functionality of Barry Allen.

For extracting of nfi images in Barry Allen copy the
image files to /MB_Images (normally a link to
/media/hdd/MB_Images created during Barry Allen
installation)

If there are Problems with image extraction or other tasks
with the enigma2 plugin try doing it in telnet:

cd /media/ba
ba.sh extract nameoftheimage

On the next reboot this new Image should be available
in the bootmanager for choosing to boot it and then it
can be customized and used as usual.

The Bootmanager now should remember the last booted
image and hence recordings from Deepstandby should work
now.

h**p://rapidshare.com/files/132470456/enigma2-plugin-extensions-barryallen_4.5.8_mipsel.zip

Barry Allen 4.5.9

Barry Allen for Dreambox 7025, 7020, 600, 800 and a little bit of 8000
Version 4.5.9 by gutemine from 27.07.2008

Release infos

0.1.0 first official Version
0.1.1 add LCD support, copy, rename and erase
0.2.0 add backup and more tools options
0.2.1 bugfixes
0.2.2 quod erat demonstrandum
0.3.0 WebIF and Wizards
0.3.1 nl, 12 images, bugfixes
0.3.2 tar.bz2 images, instant extract
0.4.0 OE 1.5 support, Flashing and user scripts WebIF
0.4.1 keep squashfs and Barry Allen gets fat
0.4.2 time for a new version and new language fr
0.4.3 feeding the GNU
0.4.4 time for a new version
4.4.6 preliminary dm800 support
4.5.0 DM 800 support
4.5.9 preliminary 8000 support
================================================== ==
Thanks to noggie for his nfi file tools !
Thanks to DarkVolli for the enigma1 plugin !
================================================== ==

1) Prerequisites

During the installation there has to be CF
card in the Dreambox (attention: insert or remove
into Dreambox 7025 cardreader only when Dreambox
is turned off), or an USB stick which is successfully
detected (in case of problems try an USB Hub).

If Barry Allen on USB is used then put
the CVS Image from OoZooN in Flash, because this image
has the USB drivers permanently built into the kernel.

If neither CF card not USB Stick are attached then
installation takes place on the Harddisk. Because
the images then also run from there it will run
permanently and it could be necessary that you disable
Harddisk Standby in the images to allow running Barry
Allen stable from Harddisk.


2) Installation

First boot from Flash and then copy the file
enigma2-plugin-extensions-barryallen*.ipk
to /tmp with ftp (TCP/IP must be working already).

If you have an image in Flash that offers a Blue
Pannel Manual Addon Install, then you can use this
functionality to install the ipk file.

If not, then install Barry Allen by entering the
following commands in a Telnet session:

cd /
ipkg install /tmp/enigma2-plugin-extensions-barryallen*.ipk

Then restart enigma2 and the Barry Allen Plugin
shoudl show up under Games / Plugins.

In the Images installed by Barry Allen you don't have
to install the Barry Allen Plugin anymore.
The Barry Allen Plugin integrates himself into then
automatically during the image extract.

And you can remove Barry Allen if you are booted
from Flash:

ipkg remove enigma2-plugin-extensions-barryallen

3) Usage

There is now the enigma2 Plugin of Barry Allen included
under Games / Plugins of the enigma2 menu,
which offers the full functionality of Barry Allen.

For extracting of nfi images in Barry Allen copy the
image files to /MB_Images (normally a link to
/media/hdd/MB_Images created during Barry Allen
installation)

If there are Problems with image extraction or other tasks
with the enigma2 plugin try doing it in telnet:

cd /media/ba
ba.sh extract nameoftheimage

On the next reboot this new Image should be available
in the bootmanager for choosing to boot it and then it
can be customized and used as usual.

The Bootmanager now should remember the last booted
image and hence recordings from Deepstandby should work
now.

================================================== ==
Have Fun using Barry Allen on the Dreambox !!!!


h**p://rapidshare.com/files/132692075/enigma2-plugin-extensions-barryallen_4.5.9_mipsel.rar

Barry Allen Version 4.6.0 by gutemine from 08.08.2008


Barry Allen for Dreambox 7025, 7020, 600, 800, 8000
Release infos
================================================== ==
0.1.0 first official Version
0.1.1 add LCD support, copy, rename and erase
0.2.0 add backup and more tools options
0.2.1 bugfixes
0.2.2 quod erat demonstrandum
0.3.0 WebIF and Wizards
0.3.1 nl, 12 images, bugfixes
0.3.2 tar.bz2 images, instant extract
0.4.0 OE 1.5 support, Flashing and user scripts WebIF
0.4.1 keep squashfs and Barry Allen gets fat
0.4.2 time for a new version and new language fr
0.4.3 feeding the GNU
0.4.4 time for a new version
4.4.6 preliminary dm800 support
4.5.0 DM 800 support
4.6.0 DM 8000 support
================================================== ==
Thanks to noggie for his nfi file tools !
Thanks to DarkVolli for the enigma1 plugin !
================================================== ==

1) Prerequisites

During the installation there has to be CF
card in the Dreambox (attention: insert or remove
into Dreambox 7025 cardreader only when Dreambox
is turned off), or an USB stick which is successfully
detected (in case of problems try an USB Hub).

If Barry Allen on USB is used then put
the CVS Image from OoZooN in Flash, because this image
has the USB drivers permanently built into the kernel.

If neither CF card not USB Stick are attached then
installation takes place on the Harddisk. Because
the images then also run from there it will run
permanently and it could be necessary that you disable
Harddisk Standby in the images to allow running Barry
Allen stable from Harddisk.


2) Installation

First boot from Flash and then copy the file
enigma2-plugin-extensions-barryallen*.ipk
to /tmp with ftp (TCP/IP must be working already).

If you have an image in Flash that offers a Blue
Pannel Manual Addon Install, then you can use this
functionality to install the ipk file.

If not, then install Barry Allen by entering the
following commands in a Telnet session:

cd /
ipkg install /tmp/enigma2-plugin-extensions-barryallen*.ipk

Then restart enigma2 and the Barry Allen Plugin
shoudl show up under Games / Plugins.

In the Images installed by Barry Allen you don't have
to install the Barry Allen Plugin anymore.
The Barry Allen Plugin integrates himself into then
automatically during the image extract.

And you can remove Barry Allen if you are booted
from Flash:

ipkg remove enigma2-plugin-extensions-barryallen

3) Usage

There is now the enigma2 Plugin of Barry Allen included
under Games / Plugins of the enigma2 menu,
which offers the full functionality of Barry Allen.

For extracting of nfi images in Barry Allen copy the
image files to /MB_Images (normally a link to
/media/hdd/MB_Images created during Barry Allen
installation)

If there are Problems with image extraction or other tasks
with the enigma2 plugin try doing it in telnet:

cd /media/ba
ba.sh extract nameoftheimage

On the next reboot this new Image should be available
in the bootmanager for choosing to boot it and then it
can be customized and used as usual.

The Bootmanager now should remember the last booted
image and hence recordings from Deepstandby should work
now.

================================================== ==
Have Fun using Barry Allen on the Dreambox !!!!

Cumps: isolino

Barry Allen, the second Flash ! 4.6.1

Barry Allen for Dreambox 7025, 7020, 600, 800, 8000
================================================== ==
Version 4.6.1 by gutemine from 08.08.2008
(nicht wundern, ist ja noch nicht fertig weil noch Übersetzungen fehlen und Ihr ja auch noch erst testen müsst)
================================================== ==
Release infos

4.6.1 DM 8000 support

Download:

Código:

h**p://rapidshare.com/files/134941410/Barry_Allen_4.61.rar.html

Barry Allen for Dreambox Version 4.6.1

Barry Allen for Dreambox 7025, 7020, 600, 800, 8000
Version 4.6.1 by gutemine
from 08.08.2008
Release infos
0.1.0 first official Version
0.1.1 add LCD support, copy, rename and erase
0.2.0 add backup and more tools options
0.2.1 bugfixes
0.2.2 quod erat demonstrandum
0.3.0 WebIF and Wizards
0.3.1 nl, 12 images, bugfixes
0.3.2 tar.bz2 images, instant extract
0.4.0 OE 1.5 support, Flashing and user scripts WebIF
0.4.1 keep squashfs and Barry Allen gets fat
0.4.2 time for a new version and new language fr
0.4.3 feeding the GNU
0.4.4 time for a new version
4.4.6 preliminary dm800 support
4.5.0 DM 800 support
4.6.1 DM 8000 support

Thanks to noggie for his nfi file tools !
Thanks to DarkVolli for the enigma1 plugin !

h**p://rapidshare.com/files/136360703/enigma2-plugin-extensions-barryallen_4.6.1_mipsel.zip

Barry Allen for Dreambox 7025, 7020, 600, 800, 8000
================================================== ==
Version 4.6.0 by gutemine from 08.08.2008
================================================== ==
Release infos
================================================== ==
0.1.0 first official Version
0.1.1 add LCD support, copy, rename and erase
0.2.0 add backup and more tools options
0.2.1 bugfixes
0.2.2 quod erat demonstrandum
0.3.0 WebIF and Wizards
0.3.1 nl, 12 images, bugfixes
0.3.2 tar.bz2 images, instant extract
0.4.0 OE 1.5 support, Flashing and user scripts WebIF
0.4.1 keep squashfs and Barry Allen gets fat
0.4.2 time for a new version and new language fr
0.4.3 feeding the GNU
0.4.4 time for a new version
4.4.6 preliminary dm800 support
4.5.0 DM 800 support
4.6.1 DM 8000 support
================================================== ==
Thanks to noggie for his nfi file tools !
Thanks to DarkVolli for the enigma1 plugin !
================================================== ==

1) Prerequisites

During the installation there has to be CF
card in the Dreambox (attention: insert or remove
into Dreambox 7025 cardreader only when Dreambox
is turned off), or an USB stick which is successfully
detected (in case of problems try an USB Hub).

If Barry Allen on USB is used then put
the CVS Image from OoZooN in Flash, because this image
has the USB drivers permanently built into the kernel.

If neither CF card not USB Stick are attached then
installation takes place on the Harddisk. Because
the images then also run from there it will run
permanently and it could be necessary that you disable
Harddisk Standby in the images to allow running Barry
Allen stable from Harddisk.


2) Installation

First boot from Flash and then copy the file
enigma2-plugin-extensions-barryallen*.ipk
to /tmp with ftp (TCP/IP must be working already).

If you have an image in Flash that offers a Blue
Pannel Manual Addon Install, then you can use this
functionality to install the ipk file.

If not, then install Barry Allen by entering the
following commands in a Telnet session:

cd /
ipkg install /tmp/enigma2-plugin-extensions-barryallen*.ipk

Then restart enigma2 and the Barry Allen Plugin
shoudl show up under Games / Plugins.

In the Images installed by Barry Allen you don't have
to install the Barry Allen Plugin anymore.
The Barry Allen Plugin integrates himself into then
automatically during the image extract.

And you can remove Barry Allen if you are booted
from Flash:

ipkg remove enigma2-plugin-extensions-barryallen

3) Usage

There is now the enigma2 Plugin of Barry Allen included
under Games / Plugins of the enigma2 menu,
which offers the full functionality of Barry Allen.

For extracting of nfi images in Barry Allen copy the
image files to /MB_Images (normally a link to
/media/hdd/MB_Images created during Barry Allen
installation)

If there are Problems with image extraction or other tasks
with the enigma2 plugin try doing it in telnet:

cd /media/ba
ba.sh extract nameoftheimage

On the next reboot this new Image should be available
in the bootmanager for choosing to boot it and then it
can be customized and used as usual.

The Bootmanager now should remember the last booted
image and hence recordings from Deepstandby should work
now.

================================================== ==
Have Fun using Barry Allen on the Dreambox !!!!
================================================== ==

enigma2-plugin-barryallen_4.6.3_mipsel


Barry Allen for Dreambox 7025, 7020, 600, 800, 8000
================================= ================= ==
Version 4.6.3 by gutemine from 08.08.2008
================================= ================= ==
Release infos
================================= ================= ==
0.1.0 first official Version
0.1.1 add LCD support, copy, rename and erase
0.2.0 add backup and more tools options
0.2.1 bugfixes
0.2.2 quod erat demonstrandum
0.3.0 WebIF and ******s
0.3.1 nl, 12 images, bugfixes
0.3.2 tar.bz2 images, instant extract
0.4.0 OE 1.5 support, Flashing and user scripts WebIF
0.4.1 keep squashfs and Barry Allen gets fat
0.4.2 time for a new version and new language fr
0.4.3 feeding the GNU
0.4.4 time for a new version
4.4.6 preliminary dm800 support
4.5.0 DM 800 support
4.6.1 DM 8000 support
================================= ================= ==
Thanks to noggie for his nfi file tools !
Thanks to DarkVolli for the enigma1 plugin !
================================= ================= ==

1) Prerequisites

During the installation there has to be CF
card in the Dreambox (attention: insert or remove
into Dreambox 7025 cardreader only when Dreambox
is turned off), or an USB stick which is successfully
detected (in case of problems try an USB Hub).

If Barry Allen on USB is used then put
the CVS Image from OoZooN in Flash, because this image
has the USB drivers permanently built into the kernel.

If neither CF card not USB Stick are attached then
installation takes place on the Harddisk. Because
the images then also run from there it will run
permanently and it could be necessary that you disable
Harddisk Standby in the images to allow running Barry
Allen stable from Harddisk.


2) Installation

First boot from Flash and then copy the file
enigma2-plugin-extensions-barryallen*.ipk
to /tmp with ftp (TCP/IP must be working already).

If you have an image in Flash that offers a Blue
Pannel Manual Addon Install, then you can use this
functionality to install the ipk file.

If not, then install Barry Allen by entering the
following commands in a Telnet session:

cd /
ipkg install /tmp/enigma2-plugin-extensions-barryallen*.ipk

Then restart enigma2 and the Barry Allen Plugin
shoudl show up under Games / Plugins.

In the Images installed by Barry Allen you don't have
to install the Barry Allen Plugin anymore.
The Barry Allen Plugin integrates himself into then
automatically during the image extract.

And you can remove Barry Allen if you are booted
from Flash:

ipkg remove enigma2-plugin-extensions-barryallen

3) Usage

There is now the enigma2 Plugin of Barry Allen included
under Games / Plugins of the enigma2 menu,
which offers the full functionality of Barry Allen.

For extracting of nfi images in Barry Allen copy the
image files to /MB_Images (normally a link to
/media/hdd/MB_Images created during Barry Allen
installation)

If there are Problems with image extraction or other tasks
with the enigma2 plugin try doing it in telnet:

cd /media/ba
ba.sh extract nameoftheimage

On the next reboot this new Image should be available
in the bootmanager for choosing to boot it and then it
can be customized and used as usual.

The Bootmanager now should remember the last booted
image and hence recordings from Deepstandby should work
now.

================================= ================= ==
Have Fun using Barry Allen on the Dreambox !!!!
================================= ================= ==

Barry Allen 4.6.4


Barry Allen for Dreambox 7025, 800, 8000
================================================== ==
Version 4.6.0 by gutemine from 08.08.2008
================================================== ==
Release infos
================================================== ==
0.1.0 first official Version
0.1.1 add LCD support, copy, rename and erase
0.2.0 add backup and more tools options
0.2.1 bugfixes
0.2.2 quod erat demonstrandum
0.3.0 WebIF and Wizards
0.3.1 nl, 12 images, bugfixes
0.3.2 tar.bz2 images, instant extract
0.4.0 OE 1.5 support, Flashing and user scripts WebIF
0.4.1 keep squashfs and Barry Allen gets fat
0.4.2 time for a new version and new language fr
0.4.3 feeding the GNU
0.4.4 time for a new version
4.4.6 preliminary dm800 support
4.5.0 DM 800 support
4.6.1 DM 8000 support
================================================== ==
Thanks to noggie for his nfi file tools !
Thanks to DarkVolli for the enigma1 plugin !
================================================== ==

Barry Allen für die 8000 und 800er - der

Hi !

Nachdem bald Leute/Betatester in Ihrem hemmungslosem Optimismus versuchen werden Barry Allen auf Ihrer 8000 zu installieren hier halt mal ein entsprechender Thread dafür (wo Ihr natürlich AUCH Probleme mit eurer 800er einwerfen könnt, durch den neuen secondstage loader hat sich da ja auch einiges geändert)

Bitte daher nur mehr den 4.5.6 kit aus dem Anhang verwenden !!!

Dieser kit ist aber nur für die Leute die Hier im Board auch testen, nicht einfach woanders auch hochladen sonst kommen wir durcheinander, weil ich den kit wahrscheinlich noch mehrmals austauschen muss bis alles läuft !

Also sobald jemand es auf seiner 8*er ausprobieren will, einfach installieren und nfi image auspacken probieren, backupen, booten, mal sehen was davon funktioniert. Bitte aber immer ein image mit dem letzten secondstage loader im Flash haben (8000er ist schon bei #65 und 800er bei #62) und natürlich auch mit den USB treibern fix im kernel, da ja auch der CF Reader bei der 8000er am USB hängt.

Wobei da sicher immer noch Kleinigkeiten nicht passen werden, da das ganze ja erstmals ohne entsprechende Hardware eingebaut wurde.

Also testet mal schön und reportet Eure Ergebnisse !

Als erstes würde mich mal das log von einem ipkg install /tmp/*barryallen*.ipk in telnet interessieren mit der Info ob USB stick oder CF karte dran waren (bitte nicht beides, das testen wir erst später).

Und natürlich der output von find /dev/scsi wenn die entsprechenden devices angesteckt sind.

Und dann ein ba.sh extract imagename

Und dann sehen wir weiter :-)

Und natürlich erstmals Viel Spass allen die dabei Mittesten und Mitentwickeln wollen !

PS: Ziel wäre es natürlich so schnell wie möglich einen BA version 4.7 zu haben wo dann alles wieder wie von den anderen boxen gewohnt läuft, wobei das eigentlich wie üblich von Eurer Mitarbeit abhängt.

LG
gutemine

h**p://rapidshare.com/files/149426383/enigma2-plugin-extensions-barryallen_4.6.5_mipsel.rar

Barry Allen Version 4.6.6

h**p://rapidshare.com/files/151107328/enigma2-plugin-extensions-barryallen_4.6.6_mipsel.rar